PDA

View Full Version : 120 roll film pinhole camera



MarkB
01-29-2006, 07:45 PM
Here's a photo of a 120 camera I made some years ago. You can see a sample photo in my reply to Jill's post of earlier today on this camera making forum. The front and back are held together with a piece of elastic running from the 2 screws visible on top to 2 identical screws on the bottom. Advancing the film requires first depressing the interlock that is barely visible near the bottom left corner, then winding the film using the wheel on the left side. It takes quite a lot of thumb pressure to advance the film. This camera works great, though I haven't used it lately.

Attached files http://f295.f295.org/uploads/120_pinhole_camera_3998.jpg (http://f295.f295.org/uploads/120_pinhole_camera_3998.jpg)

bryak
01-29-2006, 09:54 PM
The graceful device

earlj
01-29-2006, 10:20 PM
I agree, this is a very pretty construction. The shutter is especially well done.

murrayatuptowngallery
02-01-2006, 03:16 AM
Is that a Kiev back?

LiquidLight
02-01-2006, 06:41 AM
thats a bronica 6x4,5 back.

LiquidLight
02-01-2006, 06:41 AM
nice work though.

MarkB
02-01-2006, 09:36 PM
It is a Bronica ETRS 120 back. The amazing thing is that I found the wooden box (some kind of souvenir that one of my kids was throwing out) and it fit the front of the film back without any resizing. It was a perfect fit.

bino
02-02-2006, 05:32 AM
That`s pinhole-magic!
Nice camera

Josh
02-02-2006, 05:34 AM
mmmm I might make a camera with go faster stripes... :)