Results 1 to 7 of 7

Thread: Seeking Foam

  1. #1
    500+ Posts MarkB's Avatar
    Join Date
    Jan 2006
    Location
    Fort Collins, CO
    Posts
    984

    Seeking Foam

    Can anyone suggest a source of sheet foam that is different from what I find in craft stores (I'm in the USA). What I _can_ obtain is about 2-3 mm thick and does not have much "give" to it. I'd like to find something similar but about twice the thickness, say 5 mm or so, and a bit softer. The foam I get now makes a pretty good light-tight gasket, but a bit thicker would work better. Any ideas? Thanks.

  2. #2

    Seeking Foam

    i have used an old inexpensive mousepad with the fabric peeled off (from big lots) if the application can stand that much thickness. a fabric store might be another source, and upholstery shops usually carry lots of thicknesses. let us know what you discover!

  3. #3

    Seeking Foam

    Go to a construction store. In Belgium they sell foam between 5 and 10 cm for insulation of houses. Must also exist in the U.S.

  4. #4
    Administrator Tom Persinger's Avatar
    Join Date
    Jun 2004
    Location
    Pittsburgh PA USA
    Posts
    1,810

    Seeking Foam

    not sure of the sheet size you need, but you could use the closed cell type foam that's often used to tie flies (ant & beatle patterns, etc) that's about the right thickness and doesn't have much give... i've used weather stripping from home depot with reasonably good success (though for some applications it's just too thick and cutting it doesn't work so well - for me)

    tp

  5. #5

    Seeking Foam

    Some craft stores carry Foamies material in multiple thicknesses; the thicker stuff will have more compression (same percentage of a larger dimension). Lots of good suggestions above, too. Another option is the white foam sheet material that's used as padding in packages; it dyes black easily enough with a permanent marker, though IMO it's less effective than Foamies. Worst case, glue up two layers of the craft foam you have with rubber cement; it'll have twise the compression as one layer, so instead of 2 mm with 1 mm compression, you'll get 4 mm with 2 mm compression, or even 6 mm with 3 mm compression.

  6. #6

    Seeking Foam

    One possibility is the foam sold by Micro-Tools. It's sold as light baffle and mirror cushion foam for SLRs. This link is to 3/16" (4.75mm). I'm not certain how firm it is.

    https://www.micro-tools.com/store/productdetails/LB316.aspx

    Another possibility would be McMaster-Carr. They have several types of sheet foam.

    http://www.mcmaster.com

  7. #7
    500+ Posts MarkB's Avatar
    Join Date
    Jan 2006
    Location
    Fort Collins, CO
    Posts
    984

    Seeking Foam

    Thanks to all for the good ideas.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •